Nokia 2690 Charger Not Supported Problem Repair Solution

Here is the solution for Nokis 2690 charger not supported problem. This problem shows when the unit is plug-in charger and it shows “charger not supported” on the display.

if we plug in charger in nokia 2690 and it shows error charger not supported in this case mostly charging pin is working fine it can be fault of two main things on is you charger in first step change charger if your charger is not working ok.some time non original charger can be the reason for charger not supported problem.if charger is original the you may have to change this 47k resistance that is defined in diagram attached with this post.so please remove this resistance and replace it with new one from any nokia board.

Nokia 2690 Speaker Earepace No Voice Sound jumper ways problem solution.

if you have some of these problemes
No eare peace voice speaker is not working or low speaker volume problem.in this diagram you can see there is two main colors blue and red both are showing two main links of speaker that are used in speaker functioning so check these prints if the shows links and continuity in electronics meter then it means prints are working ok and you have to change speaker check speaker with meter or replace it with new one

.

at last step check these resistances that are shown in diagram given with this post.re hot and resold these resistance or replace them so that ear peace speaker problem can be solved in nokia 2690 easily.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Nokia 2690 ON-OFF Power Key Track, Jumper Ways Solution

This solution provides the connection line paths of the Nokia 2690 ON-OFF/END switch button Power button. This can help determine whether the phone is on, but it tuns battery indicator shows when the battery charger plug-in.

Only refer to the solution below and find the marked points where the button is connected.
You can power clean keyboard matrix including the membrane keyboard protection. You can then connect to 100 Ohm resistor and a diode. Also check the resistance and the diode for any damage, replace if necessary. Hope this can help in your Nokia 2690 Power Off key problem repairs.

Nokia 2690 Charger Not Supported Problem Solution Ways Jumpers.

if you are having a problem with your cellphone nokia 2690 when ever you plug in charger into its charging pin it shows charger not supported.this can be the fault of a 47k resistance that is shwon in cellphone diagram bellow.
you have to change this resistance and before replacing this 47k resistanse you can clean resold this resistance and area.

you can use it from most of nokia mobiles like nokia 1110,nokia 1112,nokia 1200,nokia 1208,nokia 6030 etc.
this resistance is used in all nokia mobile phones with same 47k value so you can use it from any of nokia mobile just position of resistance can be different in each mobile.
charger-not-suported.jpg

Nokia 2690 Mic Problem solution Ways Jumpers.

if you have a mic problem in cellphone nokia 2690.not voice is going to the destination mobile or low voice goes to the destination cell phone then you can solve this problem with help of these few steps and with this diagram.in first step check mic with multi meter.

and then in second step check mic points on the board if at board you can see connectivity and value is good then here can be attachment problem between mic and board.

Nokia 2690 MMC problem solution jumpers ways.

if you have a mmc (memory card) problem in cellphone nokia 2690 insert memory card memory card is croupt.in this case in first step change memory card of cellphone and try it to insert correctly.if it is not working yet then open mobile and check mmc card jacket and its near about area.

if there is any water damages or rust clean these parts with electronics cleaner and leave it to dry for a few mints under electrical bulb.

if with only service problem can not be solved then you can replace ic that is inline with red line.you may can check also some more components near this area.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 2690 Power Button On Off Problem Ways Jumpers Solution.

you have problem with cellphone nokia 2690 dead or no power on then you can solve this power problem with help of this post and cell phone diagram that is given bellow.

to check this problem plug in charger and check if it is charging but can not power on it means it can be problem of power button.
remove streaker from board and clean all buttons with cleaner apply little heat with hot air and then check on off button with meter is there any continuity or value if not then make this jumper from inner button to the pin point that is shown in cell phone diagram given in this post.outer print of on off button is ground that can be jumper with any ground position.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 2690 Ringer Problem Solution Jumpers Ways.

you have ringer problem in cellphone nokia 2690 low ringer sound no sound no ringing problem can be solve with help of this post and cellphone diagram that i am going to post bellow in this post.

so in first step check ringer with electronics meter and if it is showing a good value then check on board you can replace ringer to verify is it fault of ringer or not.

if with replacing ringer problem can not be solved then check ringer prints at the board if they have also a good value there can be miss attachment of ringer to board and can be gape in board and ringer so fix this problem.
if ringer points do not show value with meter at board then check all this track on board that is shown in red and blue lines and also check points that are shown with red circles.check these resistances and also capacitors that are defined in this cellphone diagram.